With straight panels - Shelf

1

2

Glue the wall fitting on with COL-PU or COL-AK (depending on the substrate), cut from residual material. Additionally fix with suitable dowels. Glue on top plate of ELEMENT-EL 100 with COL-PU, fix with FIX-SD 130.

3

Saw the font cladding to size from ELEMENT-EL 30 and provide with a cut-out.

4

Cut the shaped parts for the shelf, glue together with COL-MK and glue to the front cladding element.

5

Glue the finished front cladding with COL-PU to the cover plate, also the side plates from ELEMENT-EL 30. Additionally fix everything with FIX-SD 80.

TIP: Pre-pierce dowel holes using a cross slot screwdriver

6

Place shelf element side section from ELEMENT-EL 60 on the floor and mark the position of the shelves. Saw the shelves to size from ELEMENT-EL 100 and glue to the shelf element side section using COL-MK.

7

Also glue the second shelf element side section to the shelves with COL-MK.Additionally screw the side sections
and shelves together with FIX-SD 80.

8

A rear wall made of ELEMENT-EL 20 can be installed in the same way.

9

Erect the finished shelving, glue to the wall and washstand substructure. Reinforce all element joints with LUX ELEMENTS®-ARM system components, then level out the reinforced points with COL-AK.

The universal construction panel

Product

LUX ELEMENTS®- ELEMENT

Datasheets

LUX ELEMENTS®- ELEMENT-EL (411 KB) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (134 KB) LUX ELEMENTS®- ELEMENT-VK (411 KB)

Safety Data Sheets

Installation instructions

LUX ELEMENTS®- ELEMENT-EL VK (183 KB)

Product & packaging specs

LUX ELEMENTS®- ELEMENT (51 KB)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM: Reinforcement fabric  LUX ELEMENTS®- COL: Adhesives  LUX ELEMENTS®- DRY: Sealing filler and sealing tapes  LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior  LUX ELEMENTS®- MONT: Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2019 All rights reserved. We reserve the right to make technical changes.
Status: 03.04.2019

back
KontaktformularPrint this page!
powered by webEdition CMS