LUX ELEMENTS offers all components for the entire shower area: starting from the construction panel for wall and floor installation over the shower base through to all required sealing materials for the transitions. All in all, this results in a perfectly coordinated and tested system.
The advantages for the installer are:
- High degree of safety
- Construction and sealing in one
Please also observe the approvals for our products in accordance with the national directives.
These are constantly being extended. You can view the current status of all documents applicablefor your country under Downloads or simply contact us.
General design of a shower area using
LUX ELEMENTS®- ELEMENT-EL
1. TUB – Floor structure with shower base flush with the floor,
factory sealing
2. ELEMENT-EL – wall structure on masonry, concrete or plaster,
wooden or metal stud frame or free-standing with waterproof
construction panel.
3. ELEMENT-EL – Floor structure on wooden floor or mineral substrate
Further requirements regarding sealing elements must be taken into
consideration in accordance with national directives (see also: types
of seals).
General design of a shower area using
LUX ELEMENTS®- ELEMENT-VK
1 TUB – Floor structure with shower base flush with the floor,
factory sealing
2 ELEMENT-VK – Wall structure on masonry, concrete or plaster,
wooden or metal stud frame or free-standing with waterproof
construction panel.
3 ELEMENT-VK – Floor structure on wooden floor or mineral substrate
Further requirements regarding sealing elements must be taken into
consideration in accordance with national directives (see also: types
of seals).
The installation is very easy. Please take a look here:
- Practical instructions
-
The basis
Quality with the environment in mind
Working with hard foam support elements
The tools
Recommended cutting techniques for the ELEMENT construction panel
LUX ELEMENTS®- ELEMENT EL
LUX ELEMENTS®- ELEMENT-SL / SQ
Bending radii, slit spacings, dimensions of pre-slit hard foam
Processing instructions with slit panels
LUX ELEMENTS®- ELEMENT-VK
General processing instructions
Processing tips
The following materials are suitable for cladding hard foam support elements
- Application areas
-
Walls in interior areas
Attaching to masonry, concrete or plaster with mortar
Wall levelling over existing tile coverings
The multi-functional construction panel: application on the wall (example)
Application on free-standing metalsupports
The multi-functional construction panel: application on metal stud frame (example)
Wall-mounted elements
The creation of a levelling construction
Planking of a support construction
Floor applications
Application on beton or screed
Application on wooden floor boards
Application on the floor
The multi-functional construction panel: on mineral substrate (example)
Floor shower base
Connection to a shower area
- Construction & design
-
With straight panels
Partition walls or room dividers
With slit panels
- Practical examples
- Product
- Datasheets
-
LUX ELEMENTS®- ELEMENT-EL (411 KB) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (134 KB) LUX ELEMENTS®- ELEMENT-VK (411 KB)
- Safety Data Sheets
-
- Installation instructions
- Product & packaging specs
- Systemcomponents
-
The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.
LUX ELEMENTS®- ARM: Reinforcement fabric LUX ELEMENTS®- COL: Adhesives LUX ELEMENTS®- DRY: Sealing filler and sealing tapes LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior LUX ELEMENTS®- MONT: Mounting aids
Before printing a pdf file, please check if this is really necessary.
Environmental protection concerns us all.
To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.