LUX ELEMENTS RELAX®- SD - The curved shower

Building kit for a curved shower

RELAX-SD is a building kit for a curved shower, left-curving or right-curving, with the following components:
Curved shower

*Note: the fittings are to be located in the shower area.













1. Intrancezone
2. Showerzone

Matching Floor drain systems


RELAX-DSD L/R

Hard-foam cover element FLAT to fit RELAX-SDW

Model variants roof  

Thickness 1 37/64 in

RELAX-SDW

Hard-foam shower partition wall elements as kit in 6 segments

Overall height 98 27/64 in
Overall width 77 23/64 in
Overall depth 56 11/16 in
Inner width 71 1/16 in
Inner depth 50 25/64 in
Entrance width approx. 25 3/64 in
Material thickness 3 5/32 in
Inner surface measurement 18'274.54 in2
Outer surface measurement 19'592.04 in2

RELAX-SDO L/R

RELAX-SDO is for fittings not involving RELAX-BOSD, and also as kit in 8 sections.

Note on fitting shower doors:

If a shower door is intended to be fitted, based on the specifications given, a hard plastic insert can be pre-fitted at the factory to be used for the door’s fixings. (See FIX-PRO-MAK)

DECO-AE

Hard foam finishing element, see product group DECO

Length 98 27/64 in
Diameter 4 23/32 in

RELAX-BOSD 50 L/R

Hard-foam shower base element with integrated and sealed floor drain frame, round, in the middle, horizontal floor drain for TUB SDW L and R, curved shower.

Thickness 1 3/16 / 1 49/64 in
Square measure floor 2'650.51 in2

RELAX-UBOSD 50 L/R

To make it easier to connect the horizontal or vertical floor drains this substrate element is included for RELAX-BOSD 50 L/R.

Thickness 2 11/64 in

LUX ELEMENTS RELAX®- SD - The curved shower

Individual, special manufacture



LUX ELEMENTS®- RELAX-PLUS

LUX ELEMENTS manufactures individual customised and special products for the RELAX product group. These include dimensions, thicknesses, shapes etc. that deviate from the standard program.

Datasheets

Installation instructions

LUX ELEMENTS®- RELAX-BA-CO (0 Byte) LUX ELEMENTS®- RELAX-BA-CO FLOAT (0 Byte) LUX ELEMENTS®- RELAX-BW (0 Byte) LUX ELEMENTS®- RELAX-CU-F … (0 Byte) LUX ELEMENTS®- RELAX-JUNIOR (0 Byte) LUX ELEMENTS®- RELAX-NI … (0 Byte) LUX ELEMENTS®- RELAX-RD (0 Byte) LUX ELEMENTS®- RELAX-RL - Electronic temperature controller (0 Byte) LUX ELEMENTS®- RELAX-RP … (0 Byte) LUX ELEMENTS®- RELAX-RSE (0 Byte) LUX ELEMENTS®- RELAX-SD (0 Byte)

Test certificates
Product & packaging specs

LUX ELEMENTS®- RELAX-BW - Tileable bath tub (0 Byte) LUX ELEMENTS®- RELAX-JUNIOR (0 Byte) LUX ELEMENTS®- RELAX-RD - Round shower (0 Byte) LUX ELEMENTS®- RELAX-RL Relaxation loungers (0 Byte) LUX ELEMENTS®- RELAX-RSE - Space-saving corner shower (0 Byte) LUX ELEMENTS®- RELAX-SD - Curved shower (0 Byte)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM:
Reinforcement fabric

LUX ELEMENTS®- COL:
Adhesives

LUX ELEMENTS®- DRY:
Sealing filler and sealing tapes

LUX ELEMENTS®- FIX:
Fastening sets and plugs/exterior

LUX ELEMENTS®- MONT:
Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!