LUX ELEMENTS®- ELEMENT-EL - The universal construction panel

Proven and successful

The universal construction panel was the first product in the ELEMENT product range and has proven itself as a moisture resistant substrate for many decades.

  • A glass fibre fabric that is embedded on both sides between two mortar layers, guarantees a high degree of stability.
  • The cemented mortar coating is an optimum substrate, as tile adhesives, plasters and sealing compounds all adhere well.
  • Due to its chemical properties, the material does not provide breeding ground for fungus, i.e. it is mould-resistant.

Reliable on the wall

Ten thicknesses from 0 5/32 in to 3 15/16 in allow any use on walls: Directly on the wall, on stud frames or as a compensation layer over old tiles.

Creative in design

Thicker panels are suitable for the design of e.g. platforms, shelves and racks.

Strong on the floor

The sturdy coating enables floor use with many benefits:
  • Easier an quicker height levelling
  • Additional drying times as for screed are not required
  • Decoupling effect e.g. on cracked substrates
  • Heat-insulating, therefore well suitable in combination with underfloor heating (energy savings!)

PDF  Product specifications (PDF) (127 KB)

The structure of the original

1. Polystyrene hard-foam
2. Contact mortar layert
3. Glass-fibre fabric
4. Coating mortar layer

LUX ELEMENTS®- ELEMENT-EL - The universal construction panel

Individual, special manufacture



LUX ELEMENTS®-ELEMENT-PLUS

LUX ELEMENTS manufactures individual customised and special products for the ELEMENT product group. These include dimensions, thicknesses, shapes etc. that deviate from the standard program.

Datasheets

LUX ELEMENTS®- ELEMENT-EL (0 Byte) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (0 Byte) LUX ELEMENTS®- ELEMENT-VK (0 Byte)

Safety Data Sheets

Installation instructions

LUX ELEMENTS®- ELEMENT-EL VK (0 Byte)

Test certificates
Product & packaging specs

LUX ELEMENTS®- ELEMENT (0 Byte)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM:
Reinforcement fabric

LUX ELEMENTS®- COL:
Adhesives

LUX ELEMENTS®- DRY:
Sealing filler and sealing tapes

LUX ELEMENTS®- FIX:
Fastening sets and plugs/exterior

LUX ELEMENTS®- MONT:
Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!