With straight panels - Step construction

1

2

Make the bathtub cladding without footboard

3

Cut out identically sized supports for the step from residual material. Glue together with COL-MK at regular intervals on the floor and bathtub exterior.

4

Apply COL-MK to exposed top and side edges of the support elements. Apply in a snake-like pattern.

5

Cut out the front and top sides of the steps from residual material. First glue on the front section, then the top section.

6

Additionally fix the top and side section with FIX-SD 80.
TIP: Pre-pierce dowel holes using a cross slot screwdriver

7

The steps must not be continued to the wall. Allow to dry after gluing.

8

All element joints are to be reinforced with ARM-100 SK glass fibre reinforcement strips … …

9

… and level out with COL-AK. The surface is now ready for tiling. Further requirements (e.g. sealing for wet loads) must be taken into consideration in accordance with national directives.

The universal construction panel

Product

LUX ELEMENTS®- ELEMENT

Datasheets

LUX ELEMENTS®- ELEMENT-EL (411 KB) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (134 KB) LUX ELEMENTS®- ELEMENT-VK (411 KB)

Safety Data Sheets

Installation instructions

LUX ELEMENTS®- ELEMENT-EL VK (183 KB)

Product & packaging specs

LUX ELEMENTS®- ELEMENT (51 KB)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM: Reinforcement fabric  LUX ELEMENTS®- COL: Adhesives  LUX ELEMENTS®- DRY: Sealing filler and sealing tapes  LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior  LUX ELEMENTS®- MONT: Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!