With slit panels - Rounded wall constructions

1

2

Glue hard foam support strips as a levelling construction to the wall (see wall-mounted elements) , pre-mark the round shap  on the floor, glue ELEMENT-SL 30 together and to one another with COL-AK.

3

Additionally fix the wall-mounted construction with FIX-SD 80.

4

Level out with COL-AK, then apply reinforcement fabric ARM 600, level out again with COL-AK. Tile later.

5

Tile finished.

Pre-slit construction panel

Product

LUX ELEMENTS®- ELEMENT-SQ/SL

Datasheets

LUX ELEMENTS®- ELEMENT-EL (411 KB) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (134 KB) LUX ELEMENTS®- ELEMENT-VK (411 KB)

Safety Data Sheets

Installation instructions

LUX ELEMENTS®- ELEMENT-EL VK (183 KB)

Product & packaging specs

LUX ELEMENTS®- ELEMENT (51 KB)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM: Reinforcement fabric  LUX ELEMENTS®- COL: Adhesives  LUX ELEMENTS®- DRY: Sealing filler and sealing tapes  LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior  LUX ELEMENTS®- MONT: Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2019 All rights reserved. We reserve the right to make technical changes.
Status: 03.04.2019

back
KontaktformularPrint this page!
powered by webEdition CMS