Processing tips - The following materials are suitable for cladding hard foam support elements

Ceramics, general

fine stoneware

Marble

Natural stone

Glass mosaics

Small mosaic

Alternative covering materials

plaster

As an alternative to tiles, the application of plasters and fillers on hard foam support elements is possible if impact loads can be ruled out.

 

The specifications of the respective manufacturers must be observed.

NOTE: The joints of ELEMENT construction panels must always be previously reinforced with ARM 100.

Laying of mosaic, tiles and panels on LUX ELEMENTS®- ELEMENT

The same material is generally always used for production; whether the client later applies large-sized tiles or mosaic. The later type of use must be taken into consideration by the architect or tiler during the planning phase, because it is then that a decision is made as to whether mosaic is possible or not. In case of horizontal application we recommend e.g. a size of at least 10 x 10 cm is used for wheelchairs or walking frames, due to the high pressure load resulting from such use. Mosaic can be used in conventional household applications, as our material absorbs a pressure load of at least 0.1 N/mm2.

We recommend the use of our COL products. For mosaic, marble and other materials, please contact us for information.

Please also observe our data sheets and the table "Sealing, bonding, and jointing of LUX ELEMENTS®-products for small mosaics and tiles".

The universal construction panel

Product

LUX ELEMENTS®- ELEMENT

Datasheets

LUX ELEMENTS®- ELEMENT-EL (411 KB) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (134 KB) LUX ELEMENTS®- ELEMENT-VK (411 KB)

Safety Data Sheets

Installation instructions

LUX ELEMENTS®- ELEMENT-EL VK (183 KB)

Product & packaging specs

LUX ELEMENTS®- ELEMENT (51 KB)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM: Reinforcement fabric  LUX ELEMENTS®- COL: Adhesives  LUX ELEMENTS®- DRY: Sealing filler and sealing tapes  LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior  LUX ELEMENTS®- MONT: Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!