The tools - Recommended cutting techniques for the ELEMENT construction panel

Cutting with the cutter – suitable for EL 4 to EL 20

1

Carry out a continuous cut on the top side of the ELEMENT construction panel along an applied ruler using the cutter.

2

A single cut is sufficient for thinner panels (4 mm) to split the construction panel. For thicker panels (6 mm to 20 mm) bend along the cut.

3

Then use the cutter to sever the mortar layer and the glass fibre fabric on the rear side of the ELEMENT construction panel in its bent state.

Schneiden mit dem Winkelschleifer (Flex) – geeignet für EL 4 bis EL 50

1

Before cutting, draw a cutting line using a pencil and a ruler.

2

Apply the angle grinder (segmented diamond grinding sheet) and cut through the ELEMENT construction panel along the cutting line (very easy cutting).

3

A smooth, clean cutting edge is created.

Cutting with the jig saw – suitable for EL 4 to EL 100

1

For a clean cut of the ELEMENT construction panel, we recommend a jig saw with a serrated blade (e.g. type Bosch T313AW HCS).

2

Before the actual cut, draw a cutting line using a pencil and a ruler. Then cut to size along the line of the ELEMENT construction panel using the jig saw (very easy cut).

3

Thick panels up to 100 mm can be cleanly cut using this technique. The jig saw is also particularly suitable for cutting contours and curves.

The universal construction panel

Product

LUX ELEMENTS®- ELEMENT

Datasheets

LUX ELEMENTS®- ELEMENT-EL (411 KB) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (134 KB) LUX ELEMENTS®- ELEMENT-VK (411 KB)

Safety Data Sheets

Installation instructions

LUX ELEMENTS®- ELEMENT-EL VK (183 KB)

Product & packaging specs

LUX ELEMENTS®- ELEMENT (51 KB)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM: Reinforcement fabric  LUX ELEMENTS®- COL: Adhesives  LUX ELEMENTS®- DRY: Sealing filler and sealing tapes  LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior  LUX ELEMENTS®- MONT: Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!