Practice - Working with hard foam support elements

obenLUX ELEMENTS - the basis - Working with hard foam support elements

The basis - Quality with the environment in mind

The basis - Working with hard foam support elements

Processing instructions

The tools - The most important tools

The tools - Recommended cutting techniques for the ELEMENT construction panel

LUX ELEMENTS®- ELEMENT EL - The Basics

LUX ELEMENTS®- ELEMENT-SL / SQ - Bending radii, slit spacings, dimensions of pre-slit hard foam

LUX ELEMENTS®- ELEMENT-SL / SQ - Processing instructions with slit panels

Application areas

LUX ELEMENTS®- ELEMENT-VK - General processing instructions

Processing tips

Processing tips - The following materials are suitable for cladding hard foam support elements

Processing tips - Fastening of hooks

Processing tips - Installation of wall sockets, cable and pipe installation

Processing tips - Alternative surfaces

Application areas

Walls in interior areas - Attaching to masonry, concrete or plaster with mortar

Walls in interior areas - Wall levelling over existing tile coverings

Walls in interior areas - The multi-functional construction panel: application on the wall (example)

Walls in interior areas - Application on free-standing metalsupports

Walls in interior areas - The multi-functional construction panel: application on metal stud frame (example)

Wall-mounted elements - The creation of a levelling construction

Wall-mounted elements - Planking of a support construction

Floor applications - Application on beton or screed

Floor applications - Application on wooden floor boards

Application on the floor - The multi-functional construction panel: on mineral substrate (example)

Processing instructions

Floor shower base - Connection to a shower area

Floor shower base - Composite sealings

Construction & Design

With straight panels - Shelf

With straight panels - Step construction

With straight panels - Partition walls or room dividers

With straight panels - Bathtub cladding with shelf

With straight panels - Simple washstand construction

With slit panels - Rounded bathtub claddings

With slit panels - Rounded wall constructions

With slit panels - Rounded washstand constructions

Practical examples

LUX ELEMENTS in action

Processing tips

Processing tips - Light fascination

LUX ELEMENTS on fairs

Please note the next fairs:

more

Contact
Prosol Distribution Inc.
165 Rue Deslauriers
H4N 2S4 St-Laurent, Québec

001 514 745 1212 (tel)
001 514 745 1215 (fax)

commande.montreal@prosol.ca http://www.prosol.ca/

International Contacts
Contactform
 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!