All shower base design variants are available in the following measurements. All special formats are made-to-measure, according to your requirements.
Note: The design of descending gradients and directions belongs to planning services.
Special designs up to a maximum thickness of 2 9/16 in are possible apart from the descending gradients stated here.
TUB-EQ
TUB-EQ Shower base
(square)
Hard foam shower base elements, square, integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch in the corner.
| Standard format | a = |
| TUB-EQ 900 | 35 7/16 in |
| TUB-EQ 1000 | 39 3/8 in |
| TUB-EQ 1200 | 47 1/4 in |
| TUB-EQ 1500 | 59 1/16 in |
| Made to measure | a = |
| TUB-EQ 1-1000 | 0 3/64– 39 3/8 in |
| TUB-EQ 1001-1200 | 39 13/32–47 1/4 in |
| TUB-EQ 1201-1400 | 47 9/32–55 1/8 in |
| TUB-EQ 1401-1600 | 55 5/32–62 63/64 in |
TUB-MQ
TUB-MQ Shower base
(square)
Hard foam shower base elements, square, integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch in the centre.
| Standard format | a = |
| TUB-MQ-SET 300 | 11 13/16 in |
| Standard format | a = |
| TUB-MQ 900: | 35 7/16 in |
| TUB-MQ 1000 | 39 3/8 in |
| TUB-MQ 1200 | 47 1/4 in |
| TUB-MQ 1500 | 59 1/16 in |
| Made to measure | a = |
| TUB-MQ 1–1000 | 0 3/64– 39 3/8 in |
| TUB-MQ 1001–1200 | 39 13/32–47 1/4 in |
| TUB-MQ 1201–1400 | 47 9/32–55 1/8 in |
| TUB-MQ 1401–1600 | 55 5/32–62 63/64 in |
TUB-EF
TUB-EF Shower base
(pentagonal)
Hard foam shower base elements, pentagonal, integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch in the corner.
| Standard format | a / b = | |
| TUB-EF 900 | a = 35 7/16 in | |
| b = 17 23/32 in | ||
| TUB-EF 1000 | a = 39 3/8 in | |
| b = 17 23/32 in | ||
| Made to measure | a / b = | |
| TUB-EF 1–1000 | a = 0 3/64– 39 3/8 in | |
| b = 1/2 a | ||
| TUB-EF 1001–1200 | a = 39 13/32–47 1/4 in | |
| b = 1/2 a |
TUB-MF
TUB-MF Shower base
(pentagonal)
Hard foam shower base elements, pentagonal, integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch in the centre.
| Standard format | a / b = | |
| TUB-MF 900 | a = 35 7/16 in | |
| b = 17 23/32 in | ||
| TUB-MF 1000 | a = 39 3/8 in | |
| b = 17 23/32 in | ||
| Made to measure | a / b = | |
| TUB-MF 1–1000 | a = 0 3/64– 39 3/8 in | |
| b = 1/2 a | ||
| TUB-MF 1001–1200 | a = 39 13/32–47 1/4 in | |
| b = 1/2 a |
TUB-EK
TUB-EK Shower base
(quadrant)
Hard foam shower base elements, quadrant, with integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch in the corner.
| Standard format | a / b = | |
| TUB-EK 900 | a = 35 7/16 in | |
| b = 15 3/4 in | ||
| TUB-EK 1000 | a = 39 3/8 in | |
| b = 19 11/16 in | ||
| Made to measure | a / b = | |
| TUB-EK 1–1000 | a = 0 3/64– 39 3/8 in | |
| b = a-r | ||
| TUB-EK 1001–1200 | a = 39 13/32–47 1/4 in | |
| b = a-r |
TUB-MK
TUB-MK Shower base
(quadrant)
Hard foam shower base elements, quadrant, with integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch in the centre.
| Standard format | a / b = | |
| TUB-MK 900 | a = 35 7/16 in | |
| b = 15 3/4 in | ||
| TUB-MK 1000 | a = 39 3/8 in | |
| b = 19 11/16 in | ||
| Made to measure | a / b = | |
| TUB-MK 1–1000 | a = 0 3/64– 39 3/8 in | |
| b = a-r | ||
| TUB-MK 1001-1200 | a = 39 13/32–47 1/4 in | |
| b = a-r |
TUB-ER
TUB-ER Shower base
(rectangular)
Hard foam shower base elements, rectangular, with integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch off-centre.
| Standard format | a / b = | |
| TUB-ER 1000/800 | a = 31 1/2 in | |
| b = 39 3/8 in | ||
| TUB-ER 1200/900 | a = 35 7/16 in | |
| b = 47 1/4 in | ||
| TUB-ER 1200/1000 | a = 39 3/8 in | |
| b = 47 1/4 in | ||
| TUB-ER 1300/900 | a = 35 7/16 in | |
| b = 51 3/16 | ||
| TUB-ER 1400/900 | a = 35 7/16 in | |
| b = 55 1/8 in | ||
| TUB-ER 1500/900 | a = 35 7/16 in | |
| b = 59 1/16 in | ||
| TUB-ER 1600/900 | a = 35 7/16 in | |
| b = 62 63/64 in | ||
| Made to measure | a / b = | |
| TUB-ER 1–1000 | b (a)* = 0 3/64– 39 3/8 in | |
| TUB-ER 1001–1200 | b (a)* = 39 13/32–47 1/4 in | |
| TUB-ER 1201–1400 | b (a)* = 47 9/32–55 1/8 in | |
| TUB-ER 1401–1600 | b (a)* = 55 5/32–62 63/64 in | |
| TUB-ER 1601–1800 | b (a)* = 63 1/32–70 55/64 in | |
| TUB-ER 1801–2000 | b (a)* = 70 29/32–78 47/64 in | |
| TUB-ER 2001–2200 | b (a)* = 78 25/32–86 39/64 in | |
| * longer side is significant |
TUB-MR
TUB-MR Shower base
(rectangular)
Hard foam shower base elements, rectangular, integrated and sealed floor drain support frame 5 5/16 x 5 5/16 inch in the centre.
| Standard format | a / b = | |
| TUB-MR 1000/800 | a = 31 1/2 in | |
| b = 39 3/8 in | ||
| TUB-MR 1200/900 | a = 35 7/16 in | |
| b = 47 1/4 in | ||
| TUB-MR 1200/1000 | a = 39 3/8 in | |
| b = 47 1/4 in | ||
| TUB-MR 1300/900 | a = 35 7/16 in | |
| b = 51 3/16 in | ||
| TUB-MR 1400/900 | a = 35 7/16 in | |
| b = 55 1/8 in | ||
| TUB-MR 1500/900 | a = 35 7/16 in | |
| b = 59 1/16 in | ||
| TUB-MR 1600/900 | a = 35 7/16 in | |
| b = 62 63/64 in | ||
| Made to measure | a / b = | |
| TUB-MR 1–1000 | b (a)* = 0 3/64– 39 3/8 in | |
| TUB-MR 1001–1200 | b (a)* = 39 13/32–47 1/4 in | |
| TUB-MR 1201–1400 | b (a)* = 47 9/32–55 1/8 in | |
| TUB-MR 1401–1600 | b (a)* = 55 5/32–62 63/64 in | |
| TUB-MR 1601–1800 | b (a)* = 63 1/32–70 55/64 in | |
| TUB-MR 1801–2000 | b (a)* = 70 29/32–78 47/64 in | |
| TUB-MR 2001–2200 | b (a)* = 78 25/32–86 39/64 in | |
| * longer side is significant |
Floor drain systems
A general differentiation is made in the drain systems for the TUB shower bases between free combinable systems and completely assembled systems.
Floor drain supports for all TUB shower bases
- Point drainage
-
LUX ELEMENTS TUB®
The shower base elements for one-point drainage
The design variants and dimensions
Shower drain element with integrated floor drain support
LUX ELEMENTS TUB® TUB-H
Flush with the floor shower bases for the use on wooden sub-constructions
LUX ELEMENTS TUB® TUB-BOL
- Linear drainage
-
LUX ELEMENTS TUB®-LINE
LUX ELEMENTS TUB®- LINE
Square Design and gradient variants
Rectangular Design and gradient variants
LUX ELEMENTS TUB®- LINE RT
Channel support and gradient elements
LUX ELEMENTS TUB®- LINE H
Flush with the floor shower bases for the use on wooden sub-constructions
LUX ELEMENTS TUB®- LINE BOL
- Building kits
-
LUX ELEMENTS RELAX®
- Floor drain & accessories
-
LUX ELEMENTS TUB® Point drainage
Accessories for the floor drain systems
LUX ELEMENTS TUB®- LINE
Accessories for the floor drain systems
LUX ELEMENTS TUB®- TSM
- Individual, special manufacture
-
LUX ELEMENTS manufactures individual customised and special products for the TUB product group. These include dimensions, thicknesses, shapes etc. that deviate from the standard program.
- Datasheets
-
LUX ELEMENTS®- TUB (0 Byte) LUX ELEMENTS®- TUB -TSM (0 Byte) LUX ELEMENTS®- TUB-BOL (0 Byte) LUX ELEMENTS®- TUB-H (0 Byte) LUX ELEMENTS®- TUB-LINE (0 Byte) LUX ELEMENTS®- TUB-LINE BOL (0 Byte) LUX ELEMENTS®- TUB-LINE H (0 Byte)
- Safety Data Sheets
-
- Installation instructions
-
LUX ELEMENTS TUB®- BA-S CST (0 Byte) LUX ELEMENTS TUB®/TUB-LINE®- Instructions for assembly (0 Byte)
- Test certificates
- Product & packaging specs
-
LUX ELEMENTS®- TUB - BOL Substitute for bath tubs (0 Byte) LUX ELEMENTS®- TUB - Floor drain systems and accessories (0 Byte) LUX ELEMENTS®- TUB - Grate fitting and grate design (0 Byte) LUX ELEMENTS®- TUB - Grate fitting frame with design grate (0 Byte) LUX ELEMENTS®- TUB - H Use on wooden sub-constructions (0 Byte) LUX ELEMENTS®- TUB - Impact sound insulating mat (0 Byte) LUX ELEMENTS®- TUB - LINE - BOL Substitute for bath tubs (0 Byte) LUX ELEMENTS®- TUB - LINE - H Use on wooden sub-construction (0 Byte) LUX ELEMENTS®- TUB - LINE Floor drain systems and accessories (0 Byte) LUX ELEMENTS®- TUB - Line RT (0 Byte) LUX ELEMENTS®- TUB - LINE Shower bases for linear drainage (0 Byte) LUX ELEMENTS®- TUB - LINE Shower bases for linear drainage (0 Byte) LUX ELEMENTS®- TUB - Shower base (0 Byte) LUX ELEMENTS®- TUB - Shower drain element MQ-SET 300 (0 Byte)
- Systemcomponents
-
The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.
LUX ELEMENTS®- ARM:
Reinforcement fabricLUX ELEMENTS®- DRY:
Sealing filler and sealing tapes
Before printing a pdf file, please check if this is really necessary.
Environmental protection concerns us all.
To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.
