LUX ELEMENTS TUB®- LINE ... RT/GK - Channel support TUB-LINE COMBI

Particularly flat hard foam channel support element with sealed, floor channel drain (70 x 750 mm or 70 x 850 mm) including integrated, horizontal drain connection fitting with odour trap. A separate, retrofittable odour, foam and vermin barrier can be used instead of the odour trap (TUB-BAZ STOP). Cover rail and frame are made of stainless steel.


Sizes

This product is particularly suitable where no large installation height is possible, e.g. when renovating old buildings.

TUB-LINE COMBI RT 900
Dimensions 900 x 200 x 70 mm
Channel 70 x 750 mm
TUB-LINE COMBI RT 1200
Dimensions 1200 x 200 x 70 mm
Channel 70 x 850 mm

Design cover rail

The system offers two design options due to a reversible channel cover rail. One side has a brushed stainless steel surface, the other can be tiled to match the entire shower base. By simply turning, the desired side faces upwards.


Covering thicknesses

Upper layer thickness (tile + adhesive) for TUB-LINE COMBI for

  • the shower base = 11 mm
  • the tileable stainless steel channel cover = 12 mm


Connecting element with HTK elbow

A connecting element and an HTK elbow are included with the TUB-LINE COMBI. The connecting element is reinforced at the surface and is used for the safe covering of the drain pipe. The HTK elbow with swivel joint included in the delivery can be adjusted to an angle of 0 – 87°.

Drain performance [l/s] in accordance with DIN EN 1253: 0,7 l/s

Matching gradient elements

 

Matching gradient elements TUB-LINE COMBI … GK are optionally available for all channel support elements TUB-LINE COMBI. They can be attached to one or both sides of the channel support.

If necessary, they can be cut to size on the higher side to adapt them e.g. to a niche.

Processing steps

1.

Depending upon the routing of the pipe, the connecting element is cut to length with a cutter

2.

After fitting the drain pipe by means of the HTK elbow, the pipe is covered safely by the connecting element

 

3.

Installation is possible both on the wall side and on the room side, ...

4.

... depending on the routing of the pipe.

 

TUB-LINE COMBI RT ... + connecting element + gradient element

Please note: The design of descending gradients and directions belongs to planning services.










Please note: Dimensions in mm. Measures without adhesive coating and tiles.

Product specifications TUB-LINE COMBI, hard foam channel support elements, with integrated and sealed floor channel drain 70 x 750 mm or 70 x 850 mm, cover rail and frame made from stainless steel, cover rail in brushed stainless steel or tileable on the rear side, with odour trap.
Artikel-
nummer		 Artikel-
beteckning		 Artikel-
beskrivning		 Märkformat/
Dimensioner		 Enhet
LTUBE9306 TUB-LINE COMBI
RT 900		 Hard foam channel support element, with floor channel drain 70 x 750 mm, including integrated horizontal drain connection fitting, including connecting element with TUB-BAZ HTK, for coverings in thicknesses from 11 mm channel support element:
900 x 200 x 70 mm
connecting element
900 x 120 x 70 mm		 Set
LTUBE9307 TUB-LINE COMBI GK
R1 1200/900		 Hard foam descending gradient element, sealed 1200 x 900 x 70/85 mm piece
LTUBE9308 TUB-LINE COMBI
RT 1200		 Hard foam channel support element, with floor channel drain 70 x 850 mm, including integrated horizontal drain connection fitting, including connecting element with TUB-BAZ HTK, for coverings in thicknesses from 11 mm channel support element:
1200 x 200 x 70 mm
connecting element
1200 x 120 x 70 mm		 Set
LTUBE9309 TUB-LINE COMBI GK
Q1 1200/1200		 Hard foam descending gradient element, sealed 1200 x 1200 x 70/85 mm piece
 
Individual, special manufacture



LUX ELEMENTS®- TUB-PLUS

LUX ELEMENTS manufactures individual customised and special products for the TUB product group. These include dimensions, thicknesses, shapes etc. that deviate from the standard program.

Tekniska datasidor

Säkerhetsdatablad

Montageanvisningar

LUX ELEMENTS®- TUB COMBI/TUB LINE COMBI (D, GB, NL, F) (0 Byte) LUX ELEMENTS®- TUB H/TUB LINE H (D, GB, NL, F) (0 Byte) LUX ELEMENTS®- TUB/TUB LINE - Montering Duschgolv (D, GB, NL, F) (0 Byte)

Certifikat
Produktdata & förpakning

LUX ELEMENTS®- TUB - BAS 40 + 50 kärnhålsborrning 100 (0 Byte) LUX ELEMENTS®- TUB - BAS 50 kärnhålsborrning 160 (0 Byte) LUX ELEMENTS®- TUB - BAW 50 (0 Byte) LUX ELEMENTS®- TUB - Duschengolv (0 Byte) LUX ELEMENTS®- TUB - Golvbrunn tillbehör (0 Byte) LUX ELEMENTS®- TUB - Monteringskit (0 Byte) LUX ELEMENTS®- TUB-BOL - Ersättning av badkar (0 Byte) LUX ELEMENTS®- TUB-HEQ + HER (på träkonstruktioner) (0 Byte) LUX ELEMENTS®- TUB-LINE - BASE (0 Byte) LUX ELEMENTS®- TUB-LINE - COMBI (0 Byte) LUX ELEMENTS®- TUB-LINE ...RT/ GK (0 Byte) LUX ELEMENTS®- TUB-LINE 40 (0 Byte) LUX ELEMENTS®- TUB-LINE 70 (0 Byte) LUX ELEMENTS®- TUB-LINE Tillbehör (0 Byte)

Komponenter

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM:
Armeringsväv

LUX ELEMENTS®- COL:
Fästmedel

LUX ELEMENTS®- DRY:
Tätningsspackel och tätningsband

LUX ELEMENTS®- FIX:
Monteringssatser och dymlingar för användning utomhus

LUX ELEMENTS®- MONT:
Monteringshjälp


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2023 Med förbehåll för tekniska ändringar. Med reservation för alla uppgifter.
Uppdatera: 05.05.2023

Tillbaka
KontaktformularTrycka!
powered by webEdition CMS