LUX ELEMENTS®- MODUL-BA... - Seat variant in "floating" design

The construction

The MODUL-BA-FLOAT is a tileable seat variant in “floating” design, which makes the optical impression of more space, due to its filigree construction. The assembly of the bench takes place by way of a flexible, adaptable stainless steel substructure (straight or with corner elements).

The bench seat is made to measure corresponding with the wall construction.

A circumferential distance from the wall is maintained to allow the water to drain off.  Equipping with electric heating and/or indirect lighting is optionally possible.

 

The assembly

e.g. MODUL-BA-FLOAT-GK

consisting of a bench element and ...

... a stainless steel substructure

The assembly of the stainless steel substructure für MODULBA- FLOAT into the MODUL-WA… wall construction takes place via factory-made notches in the corner elements.

For this, a seat height of 1611/32 in is predefined (other heights possible upon request).


Hard foam filler elements are enclosed for the later covering of the cutouts.

MODUL-BA-FLOAT-G…

Bench form FLOAT, straight, between two walls, incl. stainless steel substructure.

  • MODUL-BA-FLOAT-GK from 59 1/16 to 82 43/64 in

  • MODUL-BA-FLOAT-GL from 82 43/64 to 118 7/64 in

 

MODUL-BA-FLOAT-E…

Complementary to FLOAT-G… : Bench form FLOAT, straight, incl. stainless steel substructure for corner elements

  • MODUL-BA-FLOAT-EK from 59 1/16 to 82 43/64 in
  • MODUL-BA-FLOAT-EL from 82 43/64 to 118 7/64 in

MODUL-BA-FLOAT LL

An optional light strip enables indirect LED lighting underneath the bench seat MODUL-BA-FLOAT (surcharge).

Scope of delivery also includes a control unit, by means of which different colours and colour change programs can be set.

 

MODUL-BA-EH

Electric heating set, integrated and embedded in filler at the factory, with temperature sensor and temperature regulator for bench form FLOAT, individually made to measure (surcharge).

Individual, special manufacture



LUX ELEMENTS®- MODUL-PLUS

LUX ELEMENTS manufactures individual customised and special products for the MODUL product group. These include dimensions, thicknesses, shapes etc. that deviate from the standard program.

Datasheets

LUX ELEMENTS®- MODUL-DOOR-TZ F/B (0 Byte)

Installation instructions

LUX ELEMENTS®- MODUL (0 Byte) LUX ELEMENTS®- MODUL-BA-SOLO G … (0 Byte) LUX ELEMENTS®- MODUL-DOOR-TZ B (0 Byte)

Product & packaging specs

LUX ELEMENTS®- MODUL - Doors (0 Byte) LUX ELEMENTS®- MODUL - Floor drain fitting (0 Byte) LUX ELEMENTS®- MODUL - KIT (0 Byte) LUX ELEMENTS®- MODUL - Roof (0 Byte) LUX ELEMENTS®- MODUL - Seats (0 Byte) LUX ELEMENTS®- MODUL - Wall construction (0 Byte)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM:
Reinforcement fabric

LUX ELEMENTS®- COL:
Adhesives

LUX ELEMENTS®- DRY:
Sealing filler and sealing tapes

LUX ELEMENTS®- FIX:
Fastening sets and plugs/exterior


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!