The wetroom is exposed to many stresses such as water, steam and heat. The waterproof and mould-resistant hard foam support elements from LUX ELEMENTS are the appropriate material for the substrate here.
Further advantages:
All components from a single source and individual design with your choice of tiles.
Including:
- Wall Sets
- Niches
- Benches
- Shower bases and drain system
- Curbs
- Accessories
- Downloads
- Videos
-
LUX ELEMENTS Product
Solutions for modern building design
Construction panel ELEMENT for wall and floor
Wash stands LAVADO with a "floating" design
TEC cladding elements for pipes and wall-mounted constructions
Design grates made of stainless steel
LUX ELEMENTS Installation
Wetroom Solution (for North America)
Wetroom Solution – Wall Sets (for North America)
Wetroom Solution – Niches (for North America)
Wetroom Solution – Benches (for North America)
Wetroom Solution – Shower bases (for North America)
Wetroom Solution – Curbs (for North America)
Wetroom Solution – Accessories (for North America)
Construction panel ELEMENT on wooden floors
The construction panel ELEMENT as partition wall or room divider
Construction panel ELEMENT for wall levelling on masonry
Wash stands LAVADO with a "floating" design
TEC pipe cladding for tiles or plaster
- Productinfo
- Datasheets
-
LUX ELEMENTS®- ELEMENT-EL (0 Byte) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (0 Byte) LUX ELEMENTS®- ELEMENT-VK (0 Byte)
- Safety Data Sheets
-
- Installation instructions
- Test certificates
-
Fire performance evaluation of EL 80 with ceramic tiles, in accordance with the 2006 edition of national fire protection association 286 (0 Byte)04/2008\\Test date, april 23, 2008. SwRI Project No.: 01.13544.01.216a
Fire performance evaluation of EL 80, in accordance with the 2006 edition of national fire protection association 286 (0 Byte)04/2008\\Test date, april 23, 2008. SwRI Project No.: 01.13544.01.216b
Investigation of the surface burning characteristics of a nominal 0.32-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 11, 2007. SwRI Project No.: 01.12693.01.149c
Investigation of the surface burning characteristics of a nominal 0.5-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149f
Investigation of the surface burning characteristics of a nominal 0.8-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149g
Investigation of the surface burning characteristics of a nominal 3.25-in. thick polysterene foam, encapsulates in glass fiber mesh (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149e
Investigation of the surface burning characteristics of a nominal 3.25-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar with a tile face (0 Byte)06/2007\\Test date, june 11, 2007. SwRI Project No.: 01.12693.01.149d
- Product & packaging specs
- Systemcomponents
-
The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.
LUX ELEMENTS®- ARM: Reinforcement fabric LUX ELEMENTS®- COL: Adhesives LUX ELEMENTS®- DRY: Sealing filler and sealing tapes LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior LUX ELEMENTS®- MONT: Mounting aids
Before printing a pdf file, please check if this is really necessary.
Environmental protection concerns us all.
To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.