LUX ELEMENTS Installation - The construction panel ELEMENT as partition wall or room divider

 

Lux Elements shows how easy it is to create a shower partition wall with the construction panel ELEMENT and the appropriate mounting aids MONT

All products from the LUX ELEMENTS®-ELEMENT range provide a wide variety of designs, e.g. complete bathroom designs:

  • wall claddings
  • steps
  • platforms
  • false-wall installation
  • claddings
  • shelving
  • shelving systems etc.
  • partitions walls
  • room divider

LUX ELEMENTS - Practice: Application on the floor

With straight panels - Partition walls or room dividers

Productinfo

LUX ELEMENTS®- ELEMENT EL

LUX ELEMENTS®- ELEMENT VK

Datasheets

LUX ELEMENTS®- ELEMENT-EL (0 Byte) LUX ELEMENTS®- ELEMENT-SL/SQ 30, 50, 80 (0 Byte) LUX ELEMENTS®- ELEMENT-VK (0 Byte)

Safety Data Sheets

Installation instructions

LUX ELEMENTS®- ELEMENT-EL VK (0 Byte)

Test certificates

Fire performance evaluation of EL 80 with ceramic tiles, in accordance with the 2006 edition of national fire protection association 286 (0 Byte)04/2008\\Test date, april 23, 2008. SwRI Project No.: 01.13544.01.216a

Fire performance evaluation of EL 80, in accordance with the 2006 edition of national fire protection association 286 (0 Byte)04/2008\\Test date, april 23, 2008. SwRI Project No.: 01.13544.01.216b

Investigation of the surface burning characteristics of a nominal 0.32-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 11, 2007. SwRI Project No.: 01.12693.01.149c

Investigation of the surface burning characteristics of a nominal 0.5-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149f

Investigation of the surface burning characteristics of a nominal 0.8-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149g

Investigation of the surface burning characteristics of a nominal 3.25-in. thick polysterene foam, encapsulates in glass fiber mesh (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149e

Investigation of the surface burning characteristics of a nominal 3.25-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar with a tile face (0 Byte)06/2007\\Test date, june 11, 2007. SwRI Project No.: 01.12693.01.149d

Product & packaging specs

LUX ELEMENTS®- ELEMENT (0 Byte)

Systemcomponents

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

LUX ELEMENTS®- ARM: Reinforcement fabric  LUX ELEMENTS®- COL: Adhesives  LUX ELEMENTS®- DRY: Sealing filler and sealing tapes  LUX ELEMENTS®- FIX: Fastening sets and plugs/exterior  LUX ELEMENTS®- MONT: Mounting aids


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.

 
... nach oben

© 2017 All rights reserved. We reserve the right to make technical changes.
Status: 30.01.2017

back
KontaktformularPrint this page!