LUX ELEMENTS®- MODUL-BA... - Seat variant in "floating" design

The construction

The MODUL-BA-FLOAT is a tileable seat variant in “floating” design, which makes the optical impression of more space, due to its filigree construction. The assembly of the bench takes place by way of a flexible, adaptable stainless steel substructure (straight or with corner elements).

The bench seat is made to measure corresponding with the wall construction.

A circumferential distance from the wall is maintained to allow the water to drain off. Equipping with electric heating and/or indirect lighting is optionally possible.

The assembly

e.g. MODUL-BA-FLOAT-GK

consisting of a bench element and ...

... a stainless steel substructure

The assembly of the stainless steel substructure für MODULBA- FLOAT into the MODUL-WA… wall construction takes place via factory-made notches in the corner elements.

For this, a seat height of 46 cm is predefined (other heights possible upon request).

Hard foam filler elements are enclosed for the later covering of the cutouts.

MODUL-BA-FLOAT-G…

Bench form FLOAT, straight, between two walls, incl. stainless steel substructure.

MODUL-BA-FLOAT-GK from 1500 to 2100 mm
MODUL-BA-FLOAT-GL from 2100 to 3000 mm

MODUL-BA-FLOAT-E…

Complementary to FLOAT-G… : Bench form FLOAT, straight, incl. stainless steel substructure for corner elements

MODUL-BA-FLOAT-EK from 1500 to 2100 mm
MODUL-BA-FLOAT-EL from 2100 to 3000 mm

MODUL-BA-FLOAT LL

An optional light strip enables indirect LED lighting underneath the bench seat MODUL-BA-FLOAT (surcharge).

Scope of delivery also includes a control unit, by means of which different colours and colour change programs can be set.

MODUL-BA-EH

Electric heating set, integrated and embedded in filler at the factory, with temperature sensor and temperature regulator for bench form FLOAT, individually made to measure (surcharge).

LUX ELEMENTS®- MODUL-BA... - Seat variant in

Steam room

LUX ELEMENTS^®- MODUL

Steam bath/room constructions

The construction of hot air area

LUX ELEMENTS^®- MODUL-BA...

The seat variants: Corner design & arm rest

The seat variants

Seat variant in "floating" design

Sortiment

Individual, special manufacture

LUX ELEMENTS^®- MODUL-PLUS

LUX ELEMENTS manufactures individual customised and special products for the MODUL product group. These include dimensions, thicknesses, shapes etc. that deviate from the standard program.

Monteringsanvisninger

LUX ELEMENTS^®- MODUL-TZ B/F (0 Byte)

Prøveattester

Produkt- og emballagedatoer

LUX ELEMENTS^®- MODUL - Doors (0 Byte) LUX ELEMENTS^®- MODUL - Floor drain fitting (0 Byte) LUX ELEMENTS^®- MODUL - Roof (0 Byte) LUX ELEMENTS^®- MODUL - Seats (0 Byte) LUX ELEMENTS^®- MODUL - Wall construction (0 Byte)

Systemkomponenterne

The proven and tested system components are fully matched to the processing of the hard foam support elements. The specially developed accessories ensure trouble-free working and high processing reliability.

Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.