Le mur intérieur - Panneau de construction multi-fonctions: utilisation sur ossature métallique (Exemple)

1

Le panneau petit format - ELEMENT-EL Baby 10 convient également pour cette application.

2

La distance à l’ossature est à agencer conformément aux directives /autorisations nationales. L’ossature métallique forme la sous-construction. Le premier ELEMENT est aligné perpendiculairement et en affleurement aux profilés et vissé avec FIX-S 35 + les vis appropriées.

3

Les panneaux de construction ELEMENT VK sont collés entre eux avec COL-MK. Pour ce faire, appliquer la colle en continu sur le champ du panneau.

4

Les panneaux ELEMENT-VK sont vissés avec FIX-S 35 et des vis appropriées.

5

Les panneaux de construction ELEMENT-VK se posent à joints décalés; les joints croisés ne sont pas autorisés.

Produit

LUX ELEMENTS®- ELEMENT VK

Fiches techniques

LUX ELEMENTS®- ELEMENT- SL/SQ 30, 50, 80 (0 Byte) LUX ELEMENTS®- ELEMENT- VK (0 Byte) LUX ELEMENTS®- ELEMENT-EL (0 Byte)

Instructions de montage

LUX ELEMENTS®- ELEMENT-EL VK (0 Byte)

Certificats de contrôle

Fire performance evaluation of EL 80 with ceramic tiles, in accordance with the 2006 edition of national fire protection association 286 (0 Byte)04/2008\\Test date, april 23, 2008. SwRI Project No.: 01.13544.01.216a

Fire performance evaluation of EL 80, in accordance with the 2006 edition of national fire protection association 286 (0 Byte)04/2008\\Test date, april 23, 2008. SwRI Project No.: 01.13544.01.216b

Investigation of the surface burning characteristics of a nominal 0.32-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 11, 2007. SwRI Project No.: 01.12693.01.149c

Investigation of the surface burning characteristics of a nominal 0.5-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149f

Investigation of the surface burning characteristics of a nominal 0.8-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar (supported over wire and rods) (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149g

Investigation of the surface burning characteristics of a nominal 3.25-in. thick polysterene foam, encapsulates in glass fiber mesh (0 Byte)06/2007\\Test date, june 12, 2007. SwRI Project No.: 01.12693.01.149e

Investigation of the surface burning characteristics of a nominal 3.25-in. thick polysterene foam, encapsulates in glass fiber mesh and mortar with a tile face (0 Byte)06/2007\\Test date, june 11, 2007. SwRI Project No.: 01.12693.01.149d

Rapport d´essai nº 2.1/20802/336-99f (0 Byte)12/1999\\ \\

Données produits & d'emballage

LUX ELEMENTS®- ELEMENT (0 Byte)

Les composants du système

Les accessoires, dont les qualités ont été testées, sont parfaitement adaptés à la mise en œuvre d’ELEMENT. Colles et mortiers, bandes d’étanchéité, angles de montage et chevilles ont été spécialement conçus pour assurer une mise en oeuvre exempte de tout problème.

LUX ELEMENTS®- ARM: Bandes d’armature  LUX ELEMENTS®- COL: Colles  LUX ELEMENTS®- DRY: Enduits et bandes d’étanchéité  LUX ELEMENTS®- FIX: Jeux de fixation et chevilles  LUX ELEMENTS®- MONT: Accessoires de montage


Contribuez au respect de l'environnement : N'imprimez ce Pdf. que si cela est nécessaire. Pour pouvoir visualiser les documents PDF, vous devez installer le programme gratuit Acrobat Reader, que vous pouvez télécharger en cliquant ici. Grâce à ce programme de visualisation, vous allez pouvoir ouvrir, visualiser et imprimer les documents PDF.

 
... nach oben

© 2019 Sous réserve de modifications techniques.
Toutes les informations sont données sans aucune garantie.
Actualisé: 03.04.2019

retour
Kontaktformularimprimer
powered by webEdition CMS